Reference - Panasonic SC-HTB170 Operating Instructions Manual

Using the Dolby Virtual
Speaker effect
Depending on your preference, It is possible to
turn off the 3D surround effect and the clear-
mode dialog effect.
While pressing and holding
[SOUND] on the remote control,
press and hold [VOL i] on the main
unit for more than 4 sec.
"STANDARD" indicator blinks:
3D surround effect and clear-mode
dialog effect is on.
"STEREO" indicator blinks:
3D surround effect and clear-mode
dialog effect is off.
While the setting is displayed, press
[SOUND] to change the setting.
≥ The setting changes each time [SOUND] is pressed.
≥ The indicator for the selected setting blinks for 20 sec and
then exits the setting mode.
≥ This setting will be reset to on when the main unit is turned
off.
≥ When off is selected, the dialog effect level cannot be
adjusted.
24
RQT9772
Dimmer mode
You can turn off dimmer mode and keep the LED
indicators bright.
While pressing and holding [INPUT
SELECTOR] on the remote control,
press and hold [s VOL] on the main unit
for more than 4 sec to turn off Dimmer
mode.
≥ The indicator for the current condition will turn brighter.
≥ The setting is maintained until it is changed again.
≥ Default setting of this function is on.
To turn on dimmer mode, repeat the operation above.
After performing the operation, the indicator for the current
condition will be dim.
Auto standby function
With this function turned on, this unit can be set to
automatically switch to standby mode if there is no
signal input and no operation is performed for 2 hours.
While pressing and holding
[DIALOG LEVEL j] on the remote
control, press and hold [INPUT
SELECTOR] on the main unit for
more than 4 sec.
≥ The indicator for the current setting blinks for 20 sec.
"STANDARD" indicator blinks:
Auto standby function is on.
"STEREO" indicator blinks:
Auto standby function is off.
While the indicator is blinking,
press [DIALOG LEVEL j] to change
the setting.
≥ The setting changes each time [DIALOG LEVEL j] is
pressed.
≥ The setting is maintained until it is changed again.