Connecting The Router To The Internet; Initial Configuration - NETGEAR WGT624 v3 Reference Manual

Chapter 3

Connecting the Router to the Internet

This chapter describes how to use the Smart Wizard Installation Assistant on the Resource CD to
configure your wireless router's Internet connection and wireless parameters.
Once you are connected to the Internet and your wireless connections are working, you can also
configure the router's content filtering parameters if you need to change the default settings. See
Chapter 4, "Content Filtering.
If you are an advanced user, you can also configure maintenance (see Chapter 6, "Maintenance)
and advanced (see Chapter 7, "Advanced Configuration) settings if you need to change the factory
defaults.
Note: Do not change your existing Internet connection. Instead, let the Smart Wizard
Installation Assistant on the Resource CD guide you through the setup process.

Initial Configuration

1. Insert the Resource CD into the CD drive on your computer. The following screen appears:
Connecting the Router to the Internet 3-1
v3.0, December 2005