Table of Contents
Advertisement
In the M-48 SETUP popup, the function buttons perform the following
tasks.
Button
Operation
Changes the target M-48 unit. The
[F1 ( PREV UNIT)]
target for the settings will change
according to the order of the M-48
[F2 (NEXT UNIT )]
list in M-48 MANAGER.
Accesses the M-48 SOURCE LEV/PAN
[F3 (SOURCE LEVEL/PAN)]
popup, where you can set the source
level and pan.
Accesses the M-48 SOURCE ASSIGN
[F4 (SOURCE ASSIGN)]
popup, where you can specify source
assignments.
Accesses the M-48 GROUP MIX
[F5 (GROUP MIX)]
popup, where you can make group
mix settings.
Accesses the M-48 PREFERENCES
[F6 (PREF)]
popup, where you can make
preference settings.
Clears all group solo settings. If a
[F7 (SOLO CLEAR)]
group is being soloed, this will be on
(blue).
[F8 (CLOSE)]
Closes the popup.
Accessing the M-48 SETUP popup
See
1.
Access the M-48 MANAGER popup (
page
fig.ScrM48Manager.eps
p. 40
p. 43
2.
p. 48
In the M-48 list, move the cursor to the desired target
M-48 unit and press [F2 (SETUP)].
fig.ScrM48Setup.eps
p. 38
The M-48 SETUP popup will appear.
You can assign a USER button to access this popup (
3.
View the settings of the target M-48 unit.
You can use [F1 ( PREV UNIT)] or [F2 (NEXT UNIT )] to move to a
different unit.
Management of the M-48 live personal mixer
☞
p. 34).
☞
p. 5).
37
Advertisement
Table of Contents
