Keys; Ignition Switch & Steering Lock - KYMCO Super 8 50 Owner's Manual

CONTROLS & FEATURES

Keys

Your Super 8 scooter is supplied with two identical ignition
switch keys 1. The ignition key operates the ignition switch,
and the steering lock, and is used to open the seat to gain
access to the under-seat storage compartment.
NOTE: The keys have a unique
code stamped on the tab supplied
with the keys. This code is not
stamped on the scooter or re-
corded in the vehicle's basic docu-
mentation (for security reasons).
Since this code is required to ob-
tain replacement keys, record this
important code in the box provided
on the inside, rear cover of this Owner's Manual.
Ignition switch & Steering lock
Use the ignition key to operate the ignition switch and the
steering lock:
OFF Position: All electrical
circuits are off. The engine will
not start or run. The key can
be removed from the ignition
switch.
8
ON Position: The ignition circuit is
"ON" and engine can now be started.
The key cannot be removed from the
ignition switch in this position.
1 1 1 1 1
LOCK Position: To lock the steering,
turn the handlebar all the way to the left,
push in and turn the key to the "LOCK"
position and remove the key. All electri-
cal circuits are off and the key can be re-
moved.
After locking the ignition switch, turn the handlebar gen-
tly to confirm that the steering is locked.
Do not turn the ignition switch to the lock position when
riding, as this could cause the steering to lock and re-
sult in you losing control of your scooter. Do not park
your scooter in a position that will interfere with vehicle
or pedestrian traffic.