King Canada 8301 Instruction Manual

10” random orbit polisher

Download this manual

Enlarged version

10" RANDOM ORBIT POLISHER

performance

plus

MODEL: 8301

INSTRUCTION MANUAL

IMPORTANT INFORMATION

2-YEAR

LIMITED WARRANTY

FOR THIS 10" POLISHER

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

LIMITED TOOL WARRANTY

KING CANADA makes every effort to ensure that this product meets high quality

and durability standards. KING CANADA warrants to the original retail consumer

a 2-year limited warranty as of the date the product was purchased at retail and that

each product is free from defects in materials. Warranty does not apply to defects

due directly or indirectly to misuse, abuse, negligence or accidents, repairs or

alterations and lack of maintenance. KING CANADA shall in no event be liable for

death, injuries to persons or property or for incidental, special or consequential

damages arising from the use of our products. To take advantage of this warranty,

the product or part must be returned for examination by the retailer. Shipping and

handling charges may apply. If a defect is found, KING CANADA will either repair

or replace the product.

KING CANADA TOOLS

OFFERS A 2-YEAR LIMITED WARANTY

FOR NON-COMMERCIAL USE.

Table of Contents

Page 1: Important Information
Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations and lack of maintenance. KING CANADA shall in no event be liable for death, injuries to persons or property or for incidental, special or consequential damages arising from the use of our products.
Page 2: General Safety Instructions
GENERAL SAFETY INSTRUCTIONS SPECIFIC SAFETY INSTRUCTIONS FOR POWER TOOLS 1. KNOW YOUR TOOL Additional Rules for Safe Operation Read and understand the owners manual and labels affixed to the tool. Learn its application and limitations as well as its specific potential hazards. 1.
Page 3 UNPACKING & OPERATION GETTING TO KNOW YOUR BUFFER PREPARE THE SURFACE UNPACKING YOUR BUFFER/POLISHER For best results, the surface should be clean and dry. Most high-gloss surfaces can be cleaned with a mild soap and water solution. For removal of stubborn dirt such as road When you get your new buffer/polisher home, unpack the box to make sure all tar, grease, and bug stains, you can use a mild ammonia solution such as that used in information and accessories are included.
Page 4: Troubleshooting
PARTS DIAGRAM & PARTS LISTS 100’ Refer to the Parts section of the King Canada web site for the most updated parts ** Used on 12 gauge - 20 amp circut. diagram and parts list.