Vga Pcb; Removing The Vga Pcb - Toshiba Satellite P200 Maintenance Manual

4.21 VGA PCB

4.21 VGA PCB

Removing the VGA PCB

To remove the VGA PCB, first remove the battery pack, keyboard, display assembly, and top
cover, then follow the steps below:
1. Disconnect the VGA PCB wire cable from the system board.
2. Remove the M2x6 screw securing the VGA PCB. Then remove the two hexagonal VGA
screws from the left side of the computer.
Figure 4-62
/ P205
Satellite P200 Series Maintenance Manual
Figure 4-61 Removing the VGA PCB FFC cable
Removing the VGA PCB screw and the hexagonal screws
[CONFIDENTIAL]
4 Replacement Procedures
4-53