Dodge VIPER 2013 User Manual page 57

Voice Command Tips
• Using complete names (i.e; Call John Doe vs. Call John) will result in greater system
accuracy.
• You can "chain" commands together for faster results. Say "Call John Doe, mobile", for
example.
• If you are listening to available voice command options, you do not have to listen to the
entire list. When you hear the command that you need, press the
steering wheel, wait for the beep and say your command.
Changing The Volume Of The Voice Command Prompts
• Start a dialogue by pressing the Phone button
- "Help".
• Use the radio ON/OFF VOLUME rotary knob to adjust the Uconnect™ audio prompt
volume to a comfortable level. Please note that the Uconnect™ audio prompt volume
setting for Uconnect™ is different than the audio system.
NOTE:
To access help, press the Uconnect™ Phone
"help." Touch the display or push either
the help session.
Voice Texting
• Uconnect™ Phone can read or send new text messages from your mobile phone.
• Your mobile phone must support SMS over Bluetooth
in order to use this feature. If the Uconnect™ Phone determines your phone is not
compatible with SMS messaging over Bluetooth
screen will be greyed out and the feature will not be available for use.
NOTE:
• For mobile phone compatibility and pairing instructions, please visit
www.UconnectPhone.com
• Any voice commanded system should be used only in safe driving conditions
following applicable laws regarding phone use. Your attention should be focused on
safely operating the vehicle. Failure to do so may result in a collision causing you
and others to be severely injured or killed.
• In an emergency, to use Uconnect™ Phone, your mobile phone must be:
• turned on,
• paired to Uconnect™ Phone,
• and have network coverage.
E LE CT RONI CS
, then say a command, for example
button on the steering wheel and say
or button and say "cancel" to cancel
®
the "Messaging" button on the touch
®
WARNING!
button on the
(MAP Message Access Profile)
55