Ec Declaration Of Conformity - Makita HR2300 Instruction Manual

Model HR2310T
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
Uncertainty (K) : 1.5 m/s
Work mode : chiselling function with side grip
Vibration emission (a
h,CHeq
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
h,D
Uncertainty (K) : 1.5 m/s
Model HR2601
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
h,D
Uncertainty (K) : 1.5 m/s
Model HR2610
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
Uncertainty (K) : 1.5 m/s
Work mode : chiselling function with side grip
Vibration emission (a
h,CHeq
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
h,D
Uncertainty (K) : 1.5 m/s
Model HR2610T
Work mode : hammer drilling into concrete
Vibration emission (a
h,HD
Uncertainty (K) : 1.5 m/s
Work mode : chiselling function with side grip
Vibration emission (a
h,CHeq
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
h,D
Uncertainty (K) : 1.5 m/s
2
) : 15.5 m/s
2
2
) : 10.5 m/s
2
2
) : 2.5 m/s or less
2
2
) : 12.0 m/s
2
2
) : 2.5 m/s or less
2
2
) : 15.5 m/s
2
2
) : 9.5 m/s
2
2
) : 2.5 m/s
2
2
) : 15.0 m/s
2
2
) : 9.5 m/s
2
2
) : 2.5 m/s or less
2
Model HR2611F
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiselling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model HR2611FT
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiselling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Rotary Hammer
Model No./ Type: HR2300, HR2310T, HR2600, HR2601
are of series production and
3
2
) : 12.0 m/s
h,HD
2
2
) : 9.0 m/s
h,CHeq
2
2
) : 2.5 m/s or less
h,D
2
2
) : 11.5 m/s
h,HD
2
2
) : 8.5 m/s
h,CHeq
2
2
) : 2.5 m/s or less
h,D
2
ENG901-1
ENH101-15
as the responsible