Grounding Instructions - NuTone VX475 Operating Instructions Manual

GROUNDING INSTRUCTIONS

WIRING
This section refers to Figures 17 and 18.
This appliance must be grounded. If it should malfunction or
break down, grounding provides a path of least resistance
for electric current, to reduce the risk of electric shock. This
appliance is equipped with a cord having an equipment-grounding
conductor and grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
! WARNING
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are
in doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the appliance—if
it will not fit the outlet, have a proper outlet installed by
a qualified electrician.
NORTH AMERICA
AC ELECTRIC
NEMA 5-20R
AE0003A
NORTH AMERICA
AC ELECTRIC
NEMA 6-20R
AE0004A
NOTE:
INLET LEADS TO BE CONNECTED TO POWER UNIT
TERMINALS USING CRIMP
CONNECTORS AND LOW VOLTAGE
WIRE HARNESS
OUTLET
120 VOLT GROUNDED
OUTLET BOX
GROUND PIN
POWER
CORD
MODEL V133 18/2 WIRE
TO
OTHER
INLETS
NOTE:
INLET LEADS TO BE CONNECTED TO POWER UNIT
TERMINALS USING CRIMP
CONNECTORS AND LOW VOLTAGE
WIRE HARNESS
OUTLET
240 VOLT GROUNDED
OUTLET BOX
GROUND PIN
POWER
CORD
MODEL V133 18/2 WIRE
TO
OTHER
INLETS
This appliance is for use on a standard 120 V a.c., dedicated
20-amp branch circuit with a NEMA 5-20R receptacle for
VX475 and VX550 models. For VX1000 models a nominal
240 V a.c., dedicated 20-amp branch circuit with NEMA 6-20R
receptacle is required. Make sure that the appliance is
connected to an outlet and has a grounding attachment plug
that looks like the plug shown in either Figure 17 or 18,
depending on model.
No adapter should be used with this appliance.
VX475 & VX550 SERIES
LOW VOLTAGE
WIRE HARNESS
INLET
LEADS
POWER
UNIT
VX1000 SERIES
LOW VOLTAGE
WIRE HARNESS
INLET
LEADS
POWER
UNIT
9
LOW VOLTAGE WIRE
CRIMP CONNECTORS
FIGURE 17
LOW VOLTAGE WIRE
CRIMP CONNECTORS
FIGURE 18