Machine Warning Tags And Specification Plate - Simpson Power Shot Series Operator's Manual

1.0 IMPORTANT SAFETY WARNINGS (cont.)
1.6
FIG. 1.1 - INTERNATIONAL WARNING SYMBOLS LOCATED ON THE BELT GUARD OR FRAME:
1. Warning Symbol
2. Read Operating manual
3. Wear Eye Protection
4. Do not spray any person or animal
5. Do not spray electrical components
6. Do not touch hot engine
7. Do not touch belt or moving parts during operation
Valve will open after excessive
heat buildup in system.
La vàlvula se abrirà despuès de
acumular alta temperatura en el
sistema.
PROTECT PUMP FROM FREEZING • To prevent pump damage when machine is exposed to freezing
temperatures, water in system must be removed and replaced with anti-freeze solution.
PROTEJA LA BOMBA DE CONGELARSE • Para prevenir daño a la bomba cuando la máquina esta
expuesta a la temperatura de congelamiento, el agua del sistema debe ser removida y reemplazada
con la soluciòn de anti-congelamiento.
Model
Part No.
PSI/BAR
Serial No.
GPM/LPM
V/AMP/Hz
Nozzle Size
Engine Fuel
Burner Fuel
Max Inlet Water Temp
RPM
page 7

Machine Warning Tags and Specification Plate

FIG. 1.3- LOCATED ON THE FRAME BELOW THE PUMP:
Model name (i.e., PS3200).
Machine part number assigned by the manufacturer.
Maximum pressure rating in pounds per square inch and barometric pressure measure-
ments.
Each machine is assigned an individual serial number.
Maximum water flow rating in gallons/liters per minute.
Motor rating in Volts, Amps, and Hertz. (Electric machines only)
Indicates the proper nozzle orifice size used with the machine.
Indicates type of engine fuel required.
Indicates type of burner fuel required. (Hot water machines only)
Maximum allowable incoming water temperature allowed.
Pump RPM.
www.simpsoncleaningsystems.com
FIG. 1.2 - LOCATED ON THE THERMOSTATIC RELIEF VALVE:
FIG. 1.4 - MACHINE SPECIFICATION PLATE