4: Connecting The Antennas (Aerials) - Sony STR-DH100 Operating Instructions Manual

Hide thumbs Also See for STR-DH100:
Table of Contents

Advertisement

If you connect a DVD player
• Be sure to change the factory setting of the
BDIDVD input button on the remote so that
you can use the button to control your DVD
player. For details, see "Changing button
assignments" (page 28).
• You can also rename the BO/DVD input so
that it can be displayed on the receiver's
display. For details, see "Naming inputs"
(page 19).
If you connect a DVD recorder
• Be sure to change the factory setting of the
VIDEO input button on the remote so that
you can use the button to control your DVD
recorder. For details, see "Changing button
assignments" (page 28).
• You can also rename the VIDEO input so
that it can be displayed on the receiver's
display. For details, see "Naming inputs"
(page 19).
Notes
• You can record the audio signals of the
components connected to this receiver. For
example, connect a recording component such as a
tape deck to the VIDEO AUDIO OUT jacks and
press the input buttons (DMPORT, BDIDVD,
SAT, SA-CD/CD, MD/TAPE, TUNER) to select
the component to be recorded.
• Be sure to connect the video output of the video
component to the TV, so that the image is
displayed on the TV. However, you cannot do
video recording via this receiver. Refer to the
operating instructions of each connected
component for details.
Tip
To output the sound of the TV from the speakers
connected to the receiver, be sure to turn off the
TV's volume or activate the TV's muting function.
4: Connecting the
antennas (aerials)
Connect the supplied AM loop antenna
(aerial) and FM wire antenna (aerial).
Before connecting the antennas, make sure to
disconnect the AC power cord (mains iead).
r
FM wile antenna (aerial) (supplied)
AM loop antenna (aerial)
(supplied)
*
*
The shape of the connector varies depending on
the area code of this receiver.
Notes
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
15
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents