GE PDW9200 Series Technical Service Manual page 2

IMPORTANT SAFETY NOTICE
The information in this service guide is intended for use by
individuals possessing adequate backgrounds of electrical,
electronic, and mechanical experience. Any attempt to repair a
major ap pli ance may result in personal injury and property
damage. The man u fac tur er or seller cannot be responsible for the
in ter pre ta tion of this in for ma tion, nor can it assume any liability in
connection with its use.
To avoid personal injury, disconnect power before ser vic ing this
prod uct. If electrical power is required for di ag no sis or test pur pos es,
disconnect the power immediately after per form ing the nec es sary
checks.
RECONNECT ALL GROUNDING DEVICES
If grounding wires, screws, straps, clips, nuts, or washers used to
complete a path to ground are removed for service, they must be
returned to their original position and properly fastened.
GE Consumer & Industrial
Technical Service Guide
All rights reserved. This service guide may not be reproduced in whole or in part
in any form without written permission from the General Electric Com pa ny.
WARNING
Copyright © 2004
– 2 –