Vcr Setup; External Equipment Connections; Cable Tv Setup - LG RM-26LZ30 Owner's Manual

Installation
External Equipment Connections Continued
External Equipment Connections Continued

VCR Setup

VCR Setup
- In Video mode, TV automatically reverts to TV mode if the
FCR button or FLASHBK buttons are pressed.
Connection 1
Set VCR switch to 3 or 4 and then tune TV to the same
channel number.
Connection
2
1. Connect the audio/video output jacks on VCR to the corre-
sponding input jacks on the TV. When connecting the TV
to a VCR, match the jack colors (Video = yellow, Audio
Left = white, and Audio Right = red).
2. Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner's manual.)
3. Use the TV/VIDEO button on the remote control to select
Video. (If connected to S-VIDEO on side panel, select the
S-Video external input source.)
Cable TV Setup
Cable TV Setup
- After subscribing to a local cable TV service and installing a converter, you can watch cable TV programming.
- For further cable TV information, contact a local cable service provider.
Connection 1
1. Select 3 or 4 with channel switch on cable box.
2. Tune the TV channel to the same selected output channel
of cable box.
3. Select channels at the cable box or with the cable box
remote control.
Connection
2
1. Connect the audio/video output jacks on Cable Box to the
corresponding input jacks on the TV. When connecting
the TV to Cable Box, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right =
red).
2. Use the TV/VIDEO button on the remote control to select
Video.
3. Select channels with the cable box remote control.
12
Typical
Antennas
ANT IN
S-VIDEO
OUT
ANT OUT
IN
CH3 CH4
VIDEO (R) AUDIO (L)
Direct
Connection
Typical
Antennas
ANT IN
S-VIDEO OUT
ANT OUT
IN
CH3 CH4
VIDEO (R) AUDIO (L)
Direct
Connection
2
(R) AUDIO (L)
TV
VCR
1
2
1
VCR
Side Panel
2
1
VCR
1
VIDEO
RF Cable
Cable Box