Table of Contents
Advertisement
Android™ App
3. Tap Schedule then Email Alarm.
4. Under Email trigger, tap to select ON to enable email notifications or OFF to disable.
Then under Send Email, tap to select ON to enable email notifications.
5. Under Motion sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be
triggered if a moving object is larger than 1% of the video area. If it is set to 10, a
moving object must be larger than 10% of the video area to trigger motion detection.
NOTE: This setting does not affect the PIR motion detector.
6. Select from the following trigger options for email alarms:
• Motion: Use Video motion detection to trigger email alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• PIR: Use the PIR motion detector to trigger email alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
NOTE: You may also select both PIR and Motion to receive alarms from both motion
triggers.
• Scheduling: Send email alarms based on the settings configured under Schedule.
7. Enter up to 3 email addresses under Recipient1~3 that will receive email alarms.
8. Tap Update to save your changes.
158
Enable/disable email notifications
Select motion sensitivity for video motion
Select email triggers
Enable/disable email notifications
Enter recipient email addresses
Advertisement
Table of Contents
