Wired Remote Controller-Buttons And Display - Samsung IDH1800E Service Manual

Product Specifications
• Wired Remote Controller - Buttons and Display
The wired remote controller is an optional accessory.
The wired remote controller is installed on the wall.
Communication error indicator
On Timer setting
Off Timer setting
Test indicator
Temperature adjustment
On Timer button
Off Timer button
Test button
Note : - Test button is for your installation specialist. You must NOT press it.
- After cleaning the air filter, press the filter reset button, if the filter has been installed.
Then the wired remote controller will display the FILTER SIGN indicator when the time to
clean the air filter; refer to page 30.
2-6
Removing frost indicator
buttons
Operating mode
Centralized controller indicator
(In case of installing the Centralized controller)
Mode selection button
Temperature setting
Fan speed
Filter Sign indicator
On/Off & Timer
Set/Cancel button
On/Off indicator
Fan speed
adjustment button
Filter Reset button
Samsung Electronics