If you prefer connecting your LP640 to your computer with an optional
VESA cable, connect one end of the cable to the VESA port on your com-
puter, and connect the other end of the cable to the blue Computer 2 con-
nector on the projector.
You can control the projector from an LCD control panel or computer by
connecting an RS-232 cable to the projector's Serial connector. Specific
RS-232 commands can be found in the Service and Support section of our
website.
The LP640 can be managed by ProjectorNet networking software through
its Network connector.
Contact an authorized dealer or visit our website for information on
ProjectorNet.
connect VESA cable
connect RS-232 cable
connect network cable
8
computer 1
computer 2
audio out
audio in
monitor out
computer in
computer 1
audio out
computer 2
audio in
monitor out
computer in
computer 2
audio out
Network
audio in
monitor out
computer in
R
S-video 1
serial control
network
L
video 2
audio in
video in
R
S-video 1
serial control
network
L
video 2
audio in
video in
R
S-video 1
computer 1
network
serial control
L
video 2
audio in
video in