Connecting To A Video Source - Zenith LXG-120 Owner's Manual

Connecting to a Video Source

In AV input mode, if the auto video system recognition fails to detect a correct video input signal, press the
auto tracking button on the remote control.
You can connect a VCR, a camcorder, a DVD or any other compatible video image source to the projector.
Standard Audio/Video Connection
a. When connecting the projector to an A/V source, connect the A/V input ports of the projector to the out-
put ports of the A/V source with A/V cables of the same color. The video cable is yellow. The left audio is
white and right audio is red.
S-VHS Video Connection
b. Connect S-Video input port of the projector to S-Video output port of A/V source with S-Video cable.
* For better picture quality, use the S-Video connection rather than the A/V connection.
* If you connect S-Video cable and Video cable simultaneously, only the S-Video source will be displayed.
* For Mono Audio Input, connect the single audio cable to the Audio L port of the projector.
21
Mouse
Computer
Audio
Computer Out Computer In
R Audio L/MONO Video S-Video
K
a
b
S VIDEO
(R) AUDIO (L) VIDEO
OUT
IN