Recordings Menu; Connections Menu; Signal Strength - InFocus ScreenPlay 50md10 User Manual

Main Menu Audio Audio Connections
0 Select the TV audio input where the DVI audio is connected.
Go Back
Input 1
1
Fixed/Variable Out
Input 2
2
Digital Audio Out
Input 3
3
DVI Audio Input
Input 4
Because an HDMI output carries the audio signal on the same
cable as the video, no setup is needed. However, if you
connect a DVI output to the TV's HDMI input, you need to
connect the separate DVI audio to one of the TV's audio
inputs and select that input in this screen. The TV will use
that audio input for sound when it displays a DVI signal.
Press or to point to an option, then press OK to
select it. Press to return to the menu.
Main Menu DTVLink (DVR10) AVDISC: 11.25 GB available
Description: Not available
0
Go Back
1
Picture Quality
2
Audio Audio
3
Recordings
No Title 1
4
Parental Controls No Title 2
5
Trip
Connections
6 Summer Vacation
Preferences
7
Assisted Setup
8
Web Browser
Press OK or to access the Recordings screen.
Main Menu
The Connections menu has screens for specifying and
0
Go Back
optimizing the connections (inputs) to the TV:
1
Picture Quality
•Signal Strength: Check the signal strength of a channel.
2
Audio Audio
•Channel Search: Search for available channels in your area.
3
Recordings
•Software Upgrade: Check software version and upgrades.
4 •Signal Source: Lost remote? This screen changes inputs.
Parental Controls
•Video Input Setup: Choose component or composite video.
5
Connections
•Auto Tuning: Create one button access to your devices.
6
Preferences
•DTVLink Setup: Configure settings for DTVLink devices.
7 •Special Features: For advanced users only.
Assisted Setup
•Ethernet Setup: Configure the Ethernet connection settings.
8
Web Browser
Press OK or to access the Audio menu.
Main Menu Connections
0
Go Back
Channel 1 Antenna Input
1

Signal Strength

Antenna Info
Analog
2
Channel Search
Channel 2 Antenna Input
Digital
3
Software Upgrade
Channel 3 Antenna Input
4
Signal Source
Analog
5
Video Input Setup
Channel 4 Antenna Input
Analog
6
Auto Tuning
Channel 5 Antenna Input
7 Digital
DTVLink Setup
8
Special Features
Press OK to measure the signal strengths of all channels to
9
Ethernet Setup
help you adjust terrestrial TV antenna(s).
Chapter 4
Using the TV's Menu System

Recordings Menu

The Recordings Menu allows you to view the list of programs you've recorded
800 GB
to the components connected to your DTVLink jacks. When you highlight and
Can 3:00PM 3/1/04
Cancel
7:00PM 3/2/04
select a program, the options Cancel, Play, and Delete appear. To play a
Play
10:00AM 3/5/04
2:00AM 3/6/04
Delete
program listed, highlight Play and press OK. The program plays in the small
video window. To view the program in full screen, press CLEAR or MENU. You
can see other DTVLink component's recordings by pressing the INPUT button
with this menu displayed.

Connections Menu

The Connections menu specifies various ways to adjust the inputs to your
television. Items in the Connections menu are: Signal Strength, Channel Search,
Software Upgrade, Signal Source, Video Input Setup, Auto Tuning, DTVLink
Setup, Special Features, and Ethernet Setup.
Signal Strength
Strength: N/A
This screen lists any channel EVER added to the TV. The list shows the channel
Strength: 95
number, the station name (only when tuned, e.g. NBC), whether the channel is
Strength: N/A
digital or analog, which tuner is picking up the channel, and current signal
Strength: N/A
strength of digital channels.
Strength: 94
When you move the highlight to the Signal Strength list, the TV attempts to tune
to that channel. You can then adjust your off-air antenna for maximum signal
strength (largest number) for the selected channel. The signal strength for a
digital channel will be shown as "- -" until the signal is strong enough for use,
then numbers will appear. Analog channels will always have the display,
"N/A", since analog signal strength is not measured.
Only primary channels appear in the list. Digital subchannels, e.g. 8-1, 8-2, do
not appear.
DVI Audio Input Allows you to select the audio input you're using if
you've connected an HDMI/DVI cable adapter to the DVI input. Select from
the inputs listed.
Note: If you have both Antenna and Cable channels, press the
ANT•CAB button to view your Cable channels, or vice-versa.
63