Sony Ericsson Mobile phone User Manual page 34

To turn on and record recording commands
1. Scroll to Settings, Voice control, Sound recorder.
2. Select On.
3. Instructions appear. Press
4. Lift the phone to your ear, wait for the tone and say
"Record", then press
Yes
5. Say "Play", press
Yes
To start a recording using a voice command
1. From standby, press and hold a volume key for
one second.
2. Lift the phone to your ear, wait for the tone and say
"Record". The voice command is played back to you
and a tone indicates that the recording has begun.
3. To end the recording, press
To listen to recordings using a voice command
1. From standby, press and hold a volume key for
one second.
2. Lift the phone to your ear, wait for the tone and say
"Play". The voice command is played back to you.
3. Listen to your recordings. Press
34 Calling
This is the Internet version of the user's guide. © Print only for private use.
.
Ok
.
.
.
Stop
.
Stop
Editing your voice commands
You can keep all your voice commands up to date
by re-recording them or deleting the ones you do
not use. See the following example:
To re-record a voice command
1. Scroll to Settings, Voice control, Voice profiles,
Edit commands.
2. Select a voice command.
3. Select Replace voice.
To listen to a recorded voice command, select
Play voice.
4. Lift the phone to your ear, wait for the tone and say
the command.
You can also edit the voice command for a contact
name in Edit contact in the Phonebook menu.
Tips when recording and using voice commands
If your phone cannot detect speech, one of the
following might have happened:
• You spoke too softly – try speaking more loudly.
• You held the phone too far away – hold it as you
do during a call.
• The voice command was too short – it should be
around one second long and more than one syllable.