Using The Wps Button - Huawei Ascend P1LTE User Manual

4. Select the desired Wi-Fi network. If you select a secured
network, enter the password when prompted.
• If Wi-Fi and mobile network are both enabled, your phone
connects to the Wi-Fi network preferentially and switches to the
mobile network when Wi-Fi is unavailable.
• To add a new Wi-Fi hotspot Service Set Identifier (SSID), on the
Wi-Fi
settings screen touch
• Obstacles such as walls may impede Wi-Fi signals, reducing the
signal strength.
Connecting to Wi-Fi Using WPS
Wi-Fi Protected Setup (WPS) is also called fast safe setup. It
simplifies the setup of a Wi-Fi connection. Instead of complex
settings on the Wi-Fi hotspot management software, the WPS
function allows you to set up a safe Wi-Fi connection by
pressing the WPS button or entering the PIN.
42
ADD NETWORK
.
Before connecting your device to a Wi-Fi hotspot, ensure that
the Wi-Fi hotspot supports the WPS function.

Using the WPS Button

1. Enable Wi-Fi, and then go to the Wi-Fi screen. In Wi-Fi
network list, touch the hotspot you want to connect to.
2. In the displayed dialog box, select the Show advanced
options check box. Touch off in WPS, and then choose
Push button > Connect from the displayed options menu.
3. Touch the Wi-Fi access point button. A message will be
displayed when your phone connects to the network.