Charging; Low Battery; Power On; Power Off - LG HBM-710 User Manual

Charging

- Remove the cover on the charging port and connect the charger.
- When the charger is connected with power on or off, the Headset will turn off. While charging,
the LED indicator will show a solid red light.
- The buttons will not function while the device is charging.
- It takes 3 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.

Low battery

- The LED indicator will blink red when the battery power is low.
- When the battery is not charged, the LED indicator will be blinked red and then turn off.
- When this occurs, the battery needs to be charged.

Power on

- Press and hold the PWR/END button for 2 seconds
✓
The power will turn on and a booting tone will play.

Power off

- Press and hold the PWR/END button for 5 seconds.
✓
A shutdown tone will play , the Bluetooth link will be disconnected, and the power will turn
off.

Pairing

- With the HBM-710 off, press and hold the PWR/END button for 5 seconds.
✓
You will hear a short beep and the LED indicator will stay red, when the device enters
Pairing Mode.
Using your handset, find the "Bluetooth menu" and "search for" or "add"new devices.
Select "LG HBM-710" from the list of devices and pair it with your handset.
-6-
✓
When asked for the Pass/PIN code during the pairing procedure, please enter "0000"
(4 Zeros).
✓
Once pairing has completed successfully, you will hear a beep.
✓
After pairing successfully, be sure to "Connect" to the LG HBM-710.
✓
If you want to pair with other devices in the future, the headset must be in "Pairing mode".
✓
If it will be not connected the "Pairing" for three minutes, it will be turned off.

Connecting

[ Call connection]
- Briefly press the PWR/END button to activate "Voice command".**
**Your handset must support the "Voice command" function.
✓
Press the PWR/END button for 1 second to activate last number redial. The Headset will
enter "Redial" and call the most recent number after making a beep.
- To end a call, briefly press the "PWR/END" button.
[ Auto reconnect ]
- When the HBM-710 and your handset are separated by a distance of 33 feet (10meters) or
more, the Headset and handset will disconnect. When the handset and HBM-710 are brought
back within the required distance, the HBM-710 will automatically reconnect with the handset.
- If the Headset and Handset do not automatically reconnect when they are back within the
required range, briefly press the PWR/END button to reconnect manually.

Volume control

- Briefly press the "VOLUME UP" or "VOLUME DOWN" button to adjust the speaker volume.
- There are eight levels of speaker volume.
-7-