Technical Data - Fujitsu Siemens Computers SCENIC eT Operating Manual

Technical data

Electrical data
Regulations complied with:
Protection class:
Rated voltage range: (selectable)
Frequency:
Max. rated current
Maximum power draw in operation:
Minimum power draw in operation:
reduced by Windows 9x Power
management advanced
Power draw in energy saving mode:
Power draw in the 'ready' status
Noise emission:
*) These values only apply for a SCENIC eT with the configuration below. When additional or
other components are incorporated, the power consumption or the sound emission (L
energy saving mode may exceed the requirements for the environment symbol ("Blue Angel")
(30 W or 55 dB).
Processor (256 Kbyte cache):
Main memory:
Floppy disk drive:
Hard disk drive:
Software:
CD-ROM drive
LAN:
Dimensions
Width/depth/height:
Weight
in basic configuration
Environmental conditions
Environment class 3K2
Environment class 2K2
Temperature:
•
Operating (3K2)
•
Transport (2K2)
Condensation in operating must be avoided.
Clearance required to ensure adequate ventilation:
•
left-hand side
•
front
•
rear
A26361-K554-Z100-2-7619
EN 60950 / VDE 0805, UL 1950
CSA 22.2 No.950
I
100 V -120 V / 200 V - 240 V
50 Hz - 60 Hz
100 V -120 V/2.5 A
200 V -240 V/1.5 A
< 50 W *)
< 30 W *)
< 30 W *)
< 5 W *)
Sound power level (L
Pentium III Processor at 933 MHz
128 Mbyte
1.44 Mbyte
20 Gbyte
Windows 98 SE Power management - Advanced...
48fold
10/100 Mbit Ethernet Controller
196 mm/350 mm/ 360 mm
ca. 8 kg (78.5 N) in basic configuration
DIN IEC 721 part 3-3
DIN IEC 721 part 3-2
15 °C .... 35 °C
-25 °C .... 60 °C
min. 200 mm
min. 200 mm
min. 200 mm
) < 55 dB (A) *)
WAd
WAd
) in
39