Activating And Deactivating Bluetooth; Pocketplugfree Software For Bluetooth - Fujitsu Pocket LOOX 600 Easy Manual

Connecting and networking Pocket LOOX 600 with other devices

Activating and deactivating BLUETOOTH

You will find a sliding switch on the right-hand side of your Pocket PC with which you can switch
BLUETOOTH on and off. This enables you to also use your Pocket PC wherever radio modules
such as BLUETOOTH may not be operated, such as hospitals and aircraft (please also observe the
safety precautions in the "Safety" and "Warranty" manuals on this point. At places of this kind,
simply slide the switch into the Off position. This will interrupt the BLUETOOTH connection.

PocketPlugfree software for BLUETOOTH

So that you can use BLUETOOTH, the program PocketPlugfree is installed on your Pocket PC.
PocketPlugfree is a versatile program for the Pocket PC with BLUETOOTH technology. With
PocketPlugfree you can establish a wireless connection between the Pocket PC and other devices
activated by BLUETOOTH.
With PocketPlugfree you can:
-
Access the Internet with modems or mobile telephones activated via BLUETOOTH.
-
Generally access all devices equipped with BLUETOOTH to exchange data, e.g. files, e-
mails, calendar entries or entries from Contacts.
-
Prepare or start data synchronisation via ActiveSync.
-
Establish a connection to Access Points.
Configuring PocketPlugfree
When you start PocketPlugfree for the first time, the Setup Wizard will be run. The Wizard guides you
through the initial configuration step by step. First you must assign a device name and specify a
password for your device. Then a hardware test is always carried out to determine whether the
BLUETOOTH component is operating. After this you can select the required BLUETOOTH functions
and configure these as desired.
For operation in France, set the transmission power to low (Power Class 3), as operation
i
with high transmission power (Power Class 1) is not permitted.
Ê
Follow the instructions on the display.
Additional explanations are contained in the PocketPlugfree Help (on your Pocket PC).
Using PocketPlugfree
The next time PocketPlugfree is run via Start – Programs – PocketPlugfree, the Device Explorer appears.
The Device Explorer provides you with an overview of the accessible devices. In addition, you can
also display the devices with which you want to exchange data via the Device Explorer.
Several buttons are provided in the command bar for operation.
Ê
Follow the instructions on the display.
A26391-K120-Z120-3-7619
51