Table of Contents
Advertisement
Adjusting the Monitor
A Look at the Control Panel
There are 7 keys for user's control including "iKey", "Input", "Exit", "Enter",
power swith.The following descriptions are the introduction of these keys & switch.
1.
"Power": Turn the power on or off.
2.
"iKey" : Adjust vertical position, phase, horizontal position and pixel clock automatically.
3.
"Input" key: Select between digital and analog signal sources.
4.
"Exit" key: Back to main menus, save menu or exist OSD menu
"Enter"
5.
key: Enter sub-menus, select items or save items.
6.
"<": For Left adjustment. Left key is the hot key for Contrast adjustment.
7.
">": For Right adjustment. Right key is the hot key for Brightness adjustment.
Hot Key Mode
Contrast hot-key
1. Press "<" key to enter the Contrast
hot- key mode.
2. Press "<" or ">" key to make adjust
ment. The scale can be adjusted from
maximum (100) to minimum (0).
3. Press the "Exit" to leave OSD opera-
tion. The adjustment can be auto-
saved.
Brightness hot-key
1. Press
key to enter the Brightness
">"
hot-key mode.
2. Press "<" or ">" key to make adjust-
ment. The scale can be adjusted from
maximum (100) to minimum (0).
3. Press the "Exit" to leave OSD opera-
tion. The adjustment can be auto-
saved.
ikey
Input
Exit
<
BenQ LCD Color Monitor User's Guide
> Enter
"<" and ">"
FP
781s
key and a
English 37
Advertisement
Table of Contents
