Removing The Wireless Module - Panasonic Toughbook CF-18KHH65LH Service Manual

7.6. Removing the Audio PCB
Figure 10
1. Remove the two Screws. <H>
2. Disconnect the two Cables from two Connectors
(CN701, CN702).
3. Remove the Audio PCB.
Screw<H>: DRSB2+5FKL

7.7. Removing the Wireless Module,

Port PCB and Modem PCB
<J>
<K>
<K>
Modem
PCB
Bat Con Angle
Figure 11
1. Disconnect the two Antenna Cables from two
Connectors (J5, J6).
2. Remove the Wireless Module.
3. Remove the three Screws. <I>
4. Remove the Port PCB.
5. Remove the Screw. <J>
6. Remove the Modem PCB.
7. Remove the two Screws. <K>
8. Remove the BAT CON angle.
Screw<I>: DRSB2+5FKL
<J>: XSB2+4FNL
<K>: DRSB2+5FKL
Audio PCB
<H>
Connector (CN702)
Connector (CN701)
<I>
<I>
<I>
Port PCB
Wireless Module
Connector (J5)
Connector (J6)
7.8. Removing Main PCB
HDD Guid Plate
Connector (CN36)
<N>
Connector
(CN23)
Main PCB
Connector (CN35)
Connector (CN30)
PCMCIA Unit
1. Disconnect the eight Cables from eight Connectors
(CN3, CN9, CN12, CN14, CN23, CN30, CN35, CN36).
2. Remove the Screw. <L>
3. Remove the two Screws. <M>
4. Remove the four Screws. <N>
5. Remove the Main PCB.
6. Disconnect the two Cables from two Connectors (CN8,
CN17).
7. Remove the PCMCIA Unit.
Screw<L>: DRSB2+5FZL
<M>: DXYN2+J12FNL
<N>: DXYN2+J18FN
7.9. Removing PAD PCB and I/O
PCB
<O> <O>
Connector
(CN801)
1. Disconnect the Cable from Connector (CN801).
2. Remove the three Screws. <O>
3. Remove the PAD PCB.
4. Remove the four Screws. <P>
5. Remove the two Screws. <Q>
7-3
<M> <M>
<L>
Connector (CN17)
Connector (CN8)
<N>
Connector (CN3)
Connector (CN9)
Connector (CN14)
LAN Cable
<N>
Connector (CN12)
<N>
to Connector (CN17)
to Connector (CN8)
Figure 12
I/O PCB
<Q>
<O>
PAD PCB
<Q>
Figure 13
<P>