SAT-1100 O WNER ’ S UIDE Table of Contents Introduction Placement Wall-Mounting the Satellites Speaker Connections Operation Maintenance and Service Specifications SAT-1100...
In 6 or 7 channel configurations, place the rear channel(s) behind the listening position, as shown in Figures 2 and 3. NOTE: An Infinity powered subwoofer will add impact and realism to both music and film soundtracks. Contact your Infinity dealer for recommendations on subwoofer models for your application.
OUNTING THE ATELLITES The SAT-1100 satellites are designed to be mounted on the wall if desired.There is a wall bracket included for each satellite speaker. Each speaker bracket will require (3) 1-1/2, " #10 wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriate for a 1-1/2, "...
Surround Modes When using the system in a Dolby* Digital or DTS home theater system, make sure all SAT-1100 speakers are set to “Small” . When using the SAT-1100 in a Dolby Pro Logic* home theater system, make sure the receiver’s center channel mode is set to “Normal.”...
Page 7
Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA 516.674.4INF (USA only) www.infinitysystems.com * Trademarks of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc. Infinity is a registered trademark, and Total Solutions and MMD are a trademarks, of Harman International Industries, Incorporated.