Advertisement
Quick Links
Advertisement
Related Manuals for Infinity SAT-1100
Summary of Contents for Infinity SAT-1100
- Page 1 OTAL PEAKER OLUTIONS SAT-1100 Owner’s Guide...
-
Page 2: Table Of Contents
SAT-1100 O WNER ’ S UIDE Table of Contents Introduction Placement Wall-Mounting the Satellites Speaker Connections Operation Maintenance and Service Specifications SAT-1100... -
Page 3: Introduction
In 6 or 7 channel configurations, place the rear channel(s) behind the listening position, as shown in Figures 2 and 3. NOTE: An Infinity powered subwoofer will add impact and realism to both music and film soundtracks. Contact your Infinity dealer for recommendations on subwoofer models for your application. -
Page 4: Wall-Mounting The Satellites
OUNTING THE ATELLITES The SAT-1100 satellites are designed to be mounted on the wall if desired.There is a wall bracket included for each satellite speaker. Each speaker bracket will require (3) 1-1/2, " #10 wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriate for a 1-1/2, "... -
Page 5: Operation
Surround Modes When using the system in a Dolby* Digital or DTS home theater system, make sure all SAT-1100 speakers are set to “Small” . When using the SAT-1100 in a Dolby Pro Logic* home theater system, make sure the receiver’s center channel mode is set to “Normal.”... - Page 6 OTES...
- Page 7 Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA 516.674.4INF (USA only) www.infinitysystems.com * Trademarks of Dolby Laboratories. DTS is a registered trademark of Digital Theater Systems, Inc. Infinity is a registered trademark, and Total Solutions and MMD are a trademarks, of Harman International Industries, Incorporated.