Download Print this page

King Canada 8362 Instruction Manual

1/4" laminate trimmer

Download this manual

Enlarged version

WARRANTY INFORMATION

2-YEAR

KING CANADA TOOLS

LIMITED WARRANTY

OFFERS A 2-YEAR LIMITED WARANTY

FOR NON-COMMERCIAL USE.

FOR THIS LAMINATE TRIMMER

1/4˝ LAMINATE TRIMMER

PROOF OF PURCHASE

Please keep your dated proof of purchase for warranty and servicing purposes.

LIMITED TOOL WARRANTY

KING CANADA makes every effort to ensure that this product meets high quality and

durability standards. KING CANADA warrants to the original retail consumer a 2-year

limited warranty as of the date the product was purchased at retail and that each product

is free from defects in materials. Warranty does not apply to defects due directly or

indirectly to misuse, abuse, negligence or accidents, repairs or alterations and lack of

maintenance. KING CANADA shall in no event be liable for death, injuries to persons or

property or for incidental, special or consequential damages arising from the use of our

products. To take advantage of this warranty, the product or part must be returned for

examination by the retailer. Shipping and handling charges may apply. If a defect is found,

KING CANADA will either repair or replace the product.

PARTS DIAGRAM & PARTS LISTS

Refer to the Parts section of the King Canada web site for the most updated parts diagram

and parts list.

INSTRUCTION MANUAL

MODEL: 8362

Page 1: Warranty Information
Shipping and handling charges may apply. If a defect is found, KING CANADA will either repair or replace the product. PARTS DIAGRAM & PARTS LISTS Refer to the Parts section of the King Canada web site for the most updated parts diagram and parts list. INSTRUCTION MANUAL MODEL: 8362 COPYRIGHT ©...
Page 2: Operating Instructions
GENERAL AND SPECIFIC OPERATING INSTRUCTIONS SAFETY INSTRUCTIONS Installing or Removing Bits 1. KNOW YOUR TOOL Caution: Make sure the tool is switched off and Read and understand the owners manual and labels affixed to the tool. Learn its unplugged before installing or removing a bit. application and limitations as well as its specific potential hazards.
Page 3 OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS & MAINTENANCE OPERATION Set the tool base on the workpiece to be cut without the bit making any contact. Then turn the tool on and wait until the bit reaches full speed. Move the tool forward over the Trimmer Roller Guide workpiece surface, keeping the tool base flush and advancing smoothly until the cutting is complete.