Setting Dvd Codes - JVC AV-36P902 User Manual

AV-36P902 English 9/13/01

Setting DVD codes

The remote control is prog rammed with DVD codes for power on, power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation.
1) Find the DVDPlayer brand from the list of codes shown below.
2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
3) Press and hold down the D
4) With the D
ISPLAY
5) Release the D
ISPLAY
6) Confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function, on page 54.
• After you program your remote, some DVD buttons may not work properly. If some buttons
do not work properly, use the remote control which came with your DVD player.
3:55 PM Page 21
button.
ISPLAY
button held down, enter the first code number listed with the 10 key pad.
button.
Getting Started
21