Table of Contents
Advertisement
LM1510A
15" TFT LCD Color Monitor
Problem
Color defects
Check that the signal cable connector is properly connected and that
the connection pins are not bent or damaged. Try another color
temperature.
Size, position,
Adjust the picture characteristics as described in the section OSD
shape or quality
Adjustment(4-3).
unsatisfactory
Duplicated
A problem with your graphics adapter or display unit. Contact your
images
service representative.
Image is not
Check that the display resolution and frequency from your PC or
stable
graphic adapter is an available mode for your monitor.
In your PC, you can check through Control panel, Display, Settings.
If the setting is not correct, use your computer utility program to
change the display settings.
Message :
Check that the signal cabel connector is properly connected and that
No signal
the connection pins are not bent or damaged.
If the connector is loose, tighten the connector's screws.
Check that the computer is switched on.
The power LED is a
To enter a power saving mode. You can reactivate the system by
orange color
pressing any key or moving the mouse.
Possible solution
BACK
NEXT
18/20
Advertisement
Table of Contents
