Infinity HTS-20 Owner's Manual page 14

C
ONNECTING THE
S
UBWOOFER
NOTE: If your receiver has only one
subwoofer output, it is recommended
that you use the supplied
"Y"-connector as shown.
14 HTS-20 Home-Theater System – Owner' s Manual
There are several ways to connect your subwoofer. Read this section carefully to determine which
...
method is best suited for your installation.
The subwoofer may be fed directly with a low-level signal taken from your receiver' s subwoofer-
output to connect your subwoofer. Connect one end of each stereo pair of leads to your pre-
amplifier' s left and right outputs and connect the other end to the corresponding left and right
LOW-LEVEL INPUTS
Connect your subwoofer to an unswitched AC wall outlet.
SUBWOOFER OUTPUT
Figure 11.
SUBWOOFER OUTPUT
on the subwoofer. This cable is included with the system.
L R
LEFT
RIGHT
Y-Connector
LEFT
RIGHT
– R +
+ L –
Low-Level In
SPKR
In
SPKR
Out
SUBWOOFER
– R +
+ L –
Low-Level In
SPKR
In
SPKR
Out
SUBWOOFER
L
R
L
R