Cateye Strada Slim CC-RD310W User Manual

Cateye Strada Slim CC-RD310W User Manual

Strada slim
Hide thumbs Also See for Strada Slim CC-RD310W:

Advertisement

CATEYE
STRADA SLIM
CYCLOCOMPUTER
CC-RD310W
This model comes with a sensor inspired by modern road bikes.
It may not be used for bikes with a large space between the front fork and
spoke.
Before using the computer, please thoroughly read this manual and keep
it for future reference.
Please visit our website, where detailed instructions with movies are
available and the instruction manual can be downloaded.
Warning / Caution
• Do not concentrate on the computer while riding. Ride safely!
• Install the magnet, sensor, and bracket securely. Check these periodically.
• If a child swallows a battery, consult a doctor immediately.
• Do not leave the computer in direct sunlight for a long period of time.
• Do not disassemble the computer.
• Do not drop the computer to avoid malfunction or damage.
• When you press the MODE button with the computer installed to the bracket, press around the
dot section on the surface of the computer. Pressing strongly the other section may result in
malfunction or damage.
• When cleaning the computer, bracket and sensor, do not use thinners, benzene, or alcohol.
• Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to local regulations.
• LCD screen may be distorted when viewed through polarized sunglass lenses.
Wireless Sensor
The sensor was designed to receive signals within a maximum range of 60 cm, to reduce
chance of interference.
When adjusting the wireless sensor, note the following:
• Signals cannot be received if the distance between the sensor and the computer is too large.
• The receiving distance may be shortened due to low temperature and exhausted batteries.
• Signals can be received only when the back of the computer is facing the sensor.
Interference may occur, resulting in incorrect data, if the computer is:
• Near a TV, PC, radio, motor, or in a car or train.
• Close to a railroad crossing, railway tracks, TV stations and/or radar base.
• Using with other wireless devices, or some particular battery lights.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:(1)This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device
that are not expressly approved by CatEye Co., Ltd. May void the user 's authority to operate
the equipment.
Hereby, CATEYE Co., Ltd., declares that this CC-RD310W is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
STRADA SLIM
ENG
CC-RD310W
1

Advertisement

Table of Contents
loading

Summary of Contents for Cateye Strada Slim CC-RD310W

  • Page 1 Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by CatEye Co., Ltd. May void the user ’s authority to operate the equipment. Hereby, CATEYE Co., Ltd., declares that this CC-RD310W is in compliance with the essential...
  • Page 2: Preparing The Computer

    Preparing the computer STRADA SLIM CC-RD310W Battery case cover MENU Perform the All Clear operation, when you use the unit for the fi rst time or restore the unit to the condition checked at the factory. Dot section MODE Clear all data (initialization)
  • Page 3: How To Install The Unit On Your Bicycle

    How to install the unit on your bicycle STRADA SLIM CC-RD310W Refer to the Quick Start Manual, where you can learn how to install the unit in detail using a movie. http://www.cateye.com/products/detail/CC-RD310W/manual/ (SPD-02) Bracket Bracket rubber pad Speed sensor Sensor...
  • Page 4: Install The Sensor

    How to install the unit on your bicycle STRADA SLIM CC-RD310W Install the sensor and magnet in a position where the following conditions are satisfi ed. Install the sensor The distance from the computer The magnet passes through the sensor to the sensor is within the trans- zone of the speed sensor.
  • Page 5: Switching Computer Function

    Operating the computer [Measuring screen] STRADA SLIM CC-RD310W Switching computer function Pressing the MODE button switches the selected data at the bottom in the order shown in the Pace arrow following fi gure. Indicates whether the cur- rent speed is faster ( ) or slower ( ) than the average speed.
  • Page 6: Starting / Stopping Measurement

    Operating the computer [Measuring screen] STRADA SLIM CC-RD310W Starting / Stopping measurement Resetting data Power-saving function The unit automatically measures according to the movement With the data other than Dst2 displayed, pressing and holding If the computer has not received a signal for 10 minutes, of your bicycle.
  • Page 7: Setting The Tire Circumference

    Changing the computer settings [Menu screen] STRADA SLIM CC-RD310W Overview of the menu screen Changing the With a menu you want to settings change displayed, once you press and hold the MODE button, you can MENU change various setting by...
  • Page 8: Setting The Clock

    Changing the computer settings [Menu screen] STRADA SLIM CC-RD310W From “Setting the tire circumference” To “Entering the total distance” Setting the clock Setting the function Set the clock. You can skip the selected data to be displayed. MODE MODE Once you select “Off” for a particular selected Changing the data, it will be skipped in the measurement screen.
  • Page 9: Entering The Total Distance

    Changing the computer settings [Menu screen] STRADA SLIM CC-RD310W From “Setting the function” To “Switching the circumference A/B” Entering the total distance Selecting the measurement unit Enter the total distance. The speed unit (km/h or mph) can be selected. MODE MODE (No decimal number can be entered.)
  • Page 10: Maintenance

    In use STRADA SLIM CC-RD310W Maintenance Troubleshooting Standard accessories To clean the computer or accessories, use diluted neutral detergent on a soft cloth, and wipe it off with a dry cloth. The sensor signal icon does not fl ash. Replacing the battery...
  • Page 11: Specification

    If the product fails to work due to pending on the conditions of use.) Battery life normal use, CatEye will repair or replace the defect at no Lithium battery (CR2032) x 1 Speed charge. Service must be performed by CatEye or an autho-...

Table of Contents