Acer Extensa 390 User Manual page 124

Questions
The printer does
not work.
I want to eject the
CD-ROM tray
without turning
on the power.
I cannot eject the
CD-ROM drive
tray.
Troubleshooting
Answers
q Make sure that the printer is
connected to a power outlet and it
is turned on.
q Make sure the printer cable is
connected securely to the
computer's parallel port and the
corresponding port on the printer.
q Press Fn-F6 (
then press PgDn to see the System
Information Reference screen.
Check if the parallel port is
enabled.
If the parallel port is disabled, you
need to reboot the machine and
press F2 during POST, then access
System Security. Move the cursor
to the parallel port base address
parameter and change the setting.
See section 5.3.3 for details.
There is a mechanical eject button on
the CD-ROM drive. Simply insert the
tip of a pen or paperclip and push to
eject the CD-ROM tray.
) to enter Setup,
6-5