3.4
Disk Drives
Select Disk Drives from the main menu to configure the drives installed in your
system.
The following screen shows the Disk Drives menu:
Floppy Drive A ........... [xx-MB
Floppy Drive B ........... [xx-MB
LS-120 drive as ........... [ Normal ]
•
IDE Primary Channel Master
•
IDE Primary Channel Slave
•
IDE Secondary Channel Master
•
IDE Secondary Channel Slave
↑↓ = Move Highlight Bar
Esc = Exit
3.4.1
Floppy Drives
To enter the configuration value for the first floppy drive (drive A), highlight the
Floppy Drive A parameter. Press
appropriate value.
Possible settings for the Floppy Drive parameters are:
•
[
None
•
[360 KB,
•
[1.2 MB,
3-8
AcerPower 6000 User's Guide
Disk Drives
]
5.25-inch]
5.25-inch]
xx-inch]
xx-inch]
F1 = Help
→ ← = Change Setting,
or
to view the options and select the
Page 1/1