Connecting a Printer to Your Computer
You can connect the printer to your computer using the printer cable and the
supplied floppy disk drive cable to print documents.
Before using the printer
You need to install the software supplied with the printer. See the manual
that came with your printer for more information.
You need to set up the printer port. See "I cannot print." on page 142 for
more information about setting up the printer port.
To connect a printer
Plug the floppy disk drive cable to the docking/FDD connector on your computer.
Then connect the printer cable (supplied with the printer) to the PRINTER
connector of the floppy disk drive cable.
Parallel Port
Power cord
Floppy disk drive cable
Printer
Printer cable (supplied with the printer)
Connecting a Printer to Your Computer
To PRINTER
To Docking/FDD
connector
99