Setting Time Values - Sony DSR-PD150P Operating Instructions Manual

Setting time values

The camcorder uses two types of time values time code values and user bits
The time value is displayed on the LCD screen/ in the viewfinder, or on the display
window
The user bits are convenient when using multiple cameras at the same event
When you record the picture, time code data will be recorded automatically
the time code value
This section describes the steps for setting time code recording methods for particular
shooting conditions and setting initial values
(1)
Set the POWER switch to VCR or CAMERA
(2) Press MENU to display the menu
(3) Turn the SEL/PUSH EXEC dial to select TC, then press the dial
(4)
Turn the SEL/PUSH EXEC dial to select TC MAKE, then press the dial
(5) Turn the SEL/PUSH EXEC dial to select PRESET, then press the dial
Turn the SEL/PUSH EXEC dial to select TC PRESET, then press the dial
(6)
(7) Turn the SEL/PUSH EXEC dial to select PRESET, then press the dial
(8)
Set up the first two digits Turn the SEL/PUSH EXEC dial to select the
number, then press the dial The time code is set between 00 00 00 00 and
23 59 59 24
Repeat step 8 to set up the other digits
(9)
89