Adjusting Idle Speed; Stopping Engine - Husqvarna 150BT Operator's Manual

ADJUSTING IDLE SPEED

- The idling speed is set for 2200 rpm at the factory. If it is necessary to
adjust the idle speed, use the adjustment screw on the top side of the
carburetor.
(1)Idling Adjustment Screw

STOPPING ENGINE

- Move the throttle lever to the STOP position.
(1)Stop
NOTE
If the engine does not stop when setting the ignition switch to the
stop position, close the choke lever and stop the engine.
In this case, please repair the machine at your nearest servicing
dealer.
(1)Choke Lever
(2)OPEN
(3)CLOSE
115 24 05-49 Rev. 5 2013-01-22
Operation
F14
F15
F16
English
(1)
(1)
(2)
(3)
15