Parts Of The Remote Controller - Daewoo DLV-42U1GMB Instruction Manual

Parts of the Remote
Controller
1. RECALL : Display the present modes (ATV/DTV, Video,
Comp.1/2, MMP, PC/HDMI 1/2/3) and Signal
information for 4 seconds.
Note. : In Analog TV mode, you can see information
about the Programme number, Sound, and Clock. In
DTV(DVB-T)mode, you can see information about a
channel number, name, broadcasting time and more.
2. (POWER) : TV on/off button in Stand-By mode.
3. DTV/ATV : Each time you press this button, the TV will
cycle through : ATV => DTV(DVB-T) => ATV
4. AV/COMP/MMP : Each time you press this button, the
TV will cycle through :
Video => Comp.1 => Comp.2 => MMP => Video
5. HDMI/PC : Each time you press this button, the TV will
cycle through :
HDMI1 => HDMI2 => HDMI3 => PC => HDMI1
6. FAVOURITE : Each time you press this button, the
programme will change selected(favourite) programmes
on TV mode. See page 32.
7. NUMBER : Press the numbers on this board, you can
select PR directly in TV mode. (EX. When you want to
select PR10, you should press down "1" and "0" within
2second. If you only press down "1", after 2second, PR1
will be selected.)
Note. : When the current state is Stand-By mode, you can
turn on the TV using the digit key.
8. LOCK : Prevent the use of the TV set without the remote control.
9. : You can select sound mode in Mono, Stereo.
10. EDIT : Programme Edit Display Button, See the page 31.
11. GUIDE : Access Electronic Program Guide (EPG).
It works only in DTV(DVB-T) mode.
12. OK : Confirm to change a part of the menu.
13. MENU : Menu display button.
14. CURSOR : Select on item in the menu left, right, up and down.
15. SUB MENU : MMP Menu display button in MMP mode.
16. SUB TITLE : Select the Subtitle Language.
It works only in DTV(DVB-T) mode.
17. PIP/POP(Red) : Select either PIP/POP On or Off.
23