Canon DC410 Instruction Manual page 77

- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use (CO 84).
CANNOT READ THE DISC CHECK THE
DISC
- Disc could not be recognized. Try cleaning
it
(CO
81) or replace the disc.
- This message can also appear if the
camcorder has exceeded its operational
temperature. Turn off the camcorder and
let it cool down before resuming use.
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use (CO 84).
- The disc may not be loaded correctly. Try
removing the disc and reinserting it
(CO 25).
CANNOT RECORD
- There is a problem with the disc.
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use (CO 84).
- The disc's recording surface may be dirty
or scratched.
- This message may appear when the
camcorder is repeatedly subjected to
vibrations.
CANNOT USE DISC USE OF A
RECOMMENDED DISC IS ADVISED
- The disc cannot be used. We recommend
that you use a disc whose performance
has been tested with this camcorder
(CO
7).
CARD ERROR
- A memory card error occurred. The
camcorder cannot record or display the
image. The error may be temporary. If the
message disappears after 4 seconds and
CQ appears in red, turn the camcorder off,
remove the card and reinsert the card. If
CQ changes to green, you can resume
recording/playback.
CARD FULL
- The memory card is full. Erase some still
images (OJ 55) to free some space or
replace the memory card.
[0)1
CHANGE THE BATTERY PACK
- The battery pack is exhausted. Replace or
charge the battery pack (CO 18).
DISC ACCESS FAILURE CHECK THE DISC
- There was an error when reading the disc
or attempting to write onto it. Try cleaning
the disc (CD 81) or replace it.
- This message can also appear if
condensation has formed. Wait until the
camcorder dries completely before
resuming use
(CO
84).
- The disc may not be loaded correctly. Try
removing the disc and reinserting it
(OJ 25).
DISC COVER IS OPEN
- Verify the disc is correctly inserted and
close the disc cover (CO 25).
DISC FULL
- The disc is full
("~
END" appears on the
screen). Delete some recordings (DVD-RW
in VR mode) to free some space
(CO
35) or
replace the disc.
DISC IS FINALIZED CANNOT RECORD
- You cannot record additional scenes on a
finalized DVD-RlDVD-R DL disc.
- You cannot record additional scenes or
unfinalize a DVD-RW disc in VIDEO mode
that was finalized using another digital
device.
DISC MUST BE FINALIZED
(~
MODE) TO
I
PLAY BACK IN COMPATIBLE PLAYERS
- Be sure to finalize the disc and check the
compatibility of the device before playing
back the disc on external DVD devices
(CO 48).
LOADING THE DISC
- The disc is being recognized. Wait before
you start recording.
NAMING ERROR
- The folder and file numbers have reached
their maximum value. Set
[IMG NUMBERS] to [RESET] and erase all
the images on the memory card (CO 55)
or initialize it (OJ 57).
NO CARD
- There is no memory card in the camcorder
(OJ 27).
Additional Information • 77