Network Setting > Https; Create And Install A Certificate; Certificate Information - Cisco VC 220 Administration Manual

Configuring the Cisco VC 220 Network Camera Software
Network Setting > HTTPS
Network Setting > HTTPS
STEP 1
STEP 2
STEP 3
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
HTTPS refers to the combination of HTTP interaction over an encrypted Secure
Socket Layer (SSL) or Transport Layer Security (TLS). HTTPS technology ensures
end-to-end security and provides complete defense against eavesdropping,
impersonation, and hijacking. When you complete the HTTPS configuration, click
Save to save the settings; otherwise click Cancel to discard the changes.

Create and Install a Certificate

The first step is to create a self-signed certificate:
Click Create next to Self-Signed certificate and the Create Certificate window
appears.
Fill in the required information and click Save to generate a self-signed certificate.
The certificate will be automatically installed upon generation, then you can
enable the HTTPS service (check Enable HTTPS secure connection).

Certificate Information

Once a certificate is present, you can press the Property button to view the
certificate details. After a certificate is installed or generated you cannot generate
a new one. The old certificate must be removed before a new certificate can be
generated. To remove the certificate, press the Remove button. The same rule
applies to certificate request. You need to remove an old certificate request
before generating a new one.
6
48