Setting The Fm Tuning Step; Setting The Am Tuning Step; Switching The Warning Tone; Switching The Face Auto Open - Pioneer DEH-P6850MP Operation Manual

Multi-cd control high power cd/mp3/wma/aac player with fm/am tuner
Hide thumbs Also See for DEH-P6850MP:
Table of Contents

Advertisement

Available languages

Available languages

Section
12
Initial Settings
Notes
! You can match the clock to a time signal by
pressing MULTI-CONTROL.
 If the minute is 0029, the minutes are
rounded down. (e.g., 10:18 becomes
10:00.)
 If the minute is 3059, the minutes are
rounded up. (e.g., 10:36 becomes 11:00.)
! Even when the sources are off, the clock dis-
play appears on the display. Pressing CLOCK
when the sources and feature demo are off,
turns the clock display on or off.

Setting the FM tuning step

The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
1
Use MULTI-CONTROL to select FM step.
FM step appears in the display.
2
Press MULTI-CONTROL to select the FM
tuning step.
Pressing MULTI-CONTROL repeatedly will
switch the FM tuning step between 50 kHz
and 100 kHz. The selected FM tuning step will
appear in the display.
Note
If seek tuning is performed in 50 kHz steps, sta-
tions may be tuned in imprecisely. Tune in the sta-
tions with manual tuning or use seek tuning
again.

Setting the AM tuning step

The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When
using the tuner in North, Central or South
America, reset the tuning step from 9 kHz (531
54
En
 1 602 kHz allowable) to 10 kHz (530  1 640
kHz allowable).
1
Use MULTI-CONTROL to select AM step.
AM step appears in the display.
2
Press MULTI-CONTROL to select the AM
tuning step.
Pressing MULTI-CONTROL repeatedly will
switch the AM tuning step between 9 kHz and
10 kHz. The selected AM tuning step will ap-
pear in the display.

Switching the warning tone

If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone will sound. You
can turn off the warning tone.
1
Use MULTI-CONTROL to select
Warning tone.
Warning tone appears in the display.
2
Press MULTI-CONTROL to turn warning
tone on.
ON appears in the display.
# To turn warning tone off, press
MULTI-CONTROL again.

Switching the face auto open

For theft protection, the front panel opens
automatically and easily detaches. Face auto
open is on as a default.
1
Use MULTI-CONTROL to select
Face auto open.
Face auto open appears in the display.
2
Press MULTI-CONTROL to turn the face
auto open on.
ON appears in the display.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents