Table of Contents
Advertisement
TOOLS, SUPPLIES AND REQUIRED EQUIPMENT
Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
SUPPLIED TOOLS AND EQUIPMENT
2.5mm "L" wrench
2.0mm "L" wrench
Optional Pinion
Optional Spur
Gear see page 21
Gear see page 20
NiMH battery charger*
Traxxas High-Current Connector*
1.5mm "L" wrench
Turnbuckle wrench
Aftermarket
Pre-load spacers and shock pistons
servo adapters
(on parts tree) see page 20
7-cell NiMH battery pack with
U-joint wrench
4-way wrench
Body clips and
Battery hold-down pad (to reduce
body washers
battery vibration, if necessary)
REQUIRED EQUIPMENT
(sold separately)
4 AA alkaline
batteries
*Battery and charger style are subject to change and may vary from images.
For more information on
batteries, see Use the Right
Batteries on page 11.
Recommended Equipment
These items are not required
for the operation of your
Antenna nut
model, but are a good idea to
wrench
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
SLASH • 5
Advertisement
Table of Contents
