Tools, Supplies And Required Equipment - Traxxas Bandit 2405 Owner's Manual

Tools, Supplies and Required Equipment

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
Supplied Tools and Equipment
2.0mm "L" wrench 1.5mm "L" wrench
Aftermarket servo Various pre-load spacers and shock
adapters pistons (on plastic sprue) see page 20
Required Tools and Equipment
8 AA alkaline NiCad or NiMH 7.2V to 8.4V
batteries 6 or 7-cell battery pack
Turnbuckle wrenches
Battery pad (to reduce battery
vibration, if necessary)
(sold separately)
NiCad or NiMH
Hobby knife
battery charger
U-joint wrench 4-way wrench
Various replacement Body clips and body
screws washers
Small flat-blade
Philips screwdriver
screwdriver
For more information on
batteries, see Use the Right
Batteries on page 13.
A peak-detecting charger
is recommended for best
performance and longest
battery life. For more
information, see Use the
Right Charger on page 12.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Side cutters or needle
nose pliers
Traxxas • 5