Turn Signals; Headlamp Flasher - BMW 323i Owner's Manual

Overriding selector lever lock
Should the selector lever refuse to move out of
position P even though the ignition is switched
on, the brake is depressed and the button on
the selector lever is pressed, the selector lever
lock can be overridden:
1. Unclip the sleeve of the selector lever.
2. Pull the sleeve up over the selector lever
until the sleeve is inside out.
3. Using the screwdriver from the onboard
vehicle tool kit, refer to page 237, press the
red lever while moving the selector lever to
the desired position.

Turn signals/

headlamp flasher

1 High beams
2 Headlamp flasher
3 Turn signals
60
Online Edition for Part no. 01 41 2 604 582 - © 02/10 BMW AG
Using turn signals
Press the lever beyond the resistance point.
To turn off manually, press the lever to the
resistance point.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal indicator
has failed.<
Indicating a turn briefly
Press the lever as far as the resistance point for
as long as you wish to indicate a turn.
Triple turn signal activation
Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function.
1. "Settings"
2. "Lighting"
3. "Triple turn signal"
Triple turn signal activation is activated and
is stored for the remote control currently in use.