Using The Dynamic Range Control; Using The Direct Control; Using The Down-Mix Function - Pioneer DVH-P5850MP Operation Manual

Section
12 Digital Signal Processor
2 Press A to select SLA.
Press A until SLA appears in the display.
3 Press r or q to adjust the source vo-
lume.
Each press of r or q increases or de-
creases the source volume.
SLA : +4  SLA : 4 is displayed as the source
volume is increased or decreased.
Notes
! The AM tuner volume level can also be ad-
justed with source level adjustments.
! Video CD, CD and MP3/WMA are set to the
same source level adjustment volume auto-
matically.
! DVD and the optional DVD player are set to
the same source level adjustment volume
automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Using the dynamic range
control
The dynamic range refers to the difference be-
tween the largest and softest sounds. The dy-
namic range control compresses this
difference so that you can clearly hear sounds
even at low volume levels.
! The dynamic range control is effective only
on Dolby Digital sounds.
1 Press A to select DRC.
Press A until DRC appears in the display.
# When playing other than the DVD disc, you
cannot switch this mode.
64
En
2 Press r to turn the dynamic range
control on.
DRC :ON appears in the display. Dynamic
range control is now on.
# To turn dynamic range control off, press
q.

Using the direct control

You can override audio settings to check for ef-
fectiveness of your audio settings.
1 Press A to select DIRCT.
Press A until DIRCT appears in the display.
2 Press r to turn the direct control on.
DIRCT:ON appears in the display. Direct con-
trol is now on.
# To turn direct control off, press q.
Notes
! All audio functions are locked out during
DIRCT:ON except VOLUME and PLII.
! If the source is a 2-channel LPCM audio or a
2-channel Dolby Digital audio and you select
DIRCT:ON, audio is heared only over front left/
right speakers.

Using the down-mix function

Only when the multi-channel processor (e.g.,
DEQ-P7650) is connected to this unit, you can
operate this function.
The down-mix function allows you to play back
multi-channel audio in 2 channels.
1 Press A to select Lo/Ro.
Press A until Lo/Ro appears in the display.
# If the down mix Lt/Rt has been previously se-
lected, Lt/Rt will be displayed.