Programming The Remote Control For Devices Made By Fujitsu Siemens Computers - Fujitsu Siemens Computers MYRICA V27-1 Operating Manual

Ofrecido por www.electromanuales.com
Programming the remote control for devices made by
Fujitsu Siemens Computers
Using the , and
Fujitsu Siemens Computers. Several device classes are stored for each button, in which the
respective functions of different devices are pre-set.
Device Class TV button
1 MYRICA TYPE I
•
•
•
•
2 MYRICA TYPE II
•
•
3 MYRICA TYPE III
•
•
•
•
•
•
MYRICA TYPE IV
4
Accepting the device class
► To select the device type, press the relevant device selection button for about 5 seconds.
The LED of the selected button for device selection will light up.
► Press the number of the desired device class on the numerical keypad.
The LED of the selected button for device selection will flash quickly three times.
The device is activated. You can operate the device using your DIGITAL HOME remote control.
Example:
You would like to set the remote control of the MYRICA V32-1 device (
► Press the button for about 5 seconds.
The LED of the TV button will light up.
10600732149, Edition 3
buttons, you can set the remote control for different devices made by
MYRICA P42-1A/-1AH
MYRICA P42-2/-2H
MYRICA P50-2/-2H
MYRICA V40-1
MYRICA V27-1/-2
MYRICA V32-1/SE 32
MYRICA VQ46-3SU
MYRICA VQ40-3SU
MYRICA VQ40-1/-2
MYRICA VQ32-1
MYRICA PQ50-1
MYRICA PQ42-1
DIGITAL HOME Remote Control
MC button
Media Center edition
compatibility mode
ACTIVY Media Center 5xx
ACTIVY Media Center 3xx
–
MD button
- ACTIVY Media
Player 150
–
–
–
button, device class 2):
English - 7