Sony DAV-HDX285 Operating Instructions Manual page 64

64
GB
Other Settings
[SYSTEM SETUP]
SYSTEM SETUP
SCREEN SAVER: ON
BACKGRO\jND:.. JACKETPICTUF:lE
PARENTAL CONTROL:
DivX: Registration C6de-
MULTI-OI8C RESUME: . ... ON
RESET:
• [SCREEN SAVER]
You can reduce the damage to the display device
(ghosting). Press any button (e.g., C» to cancel
the screen saver.
[ON]: The screen saver image appears if you do
not operate the system for about 15 minutes.
[OFF]: Off.
• [BACKGROUND]
You can select the background color or picture
on the TV screen.
[JACKET PICTURE]: The jacket picture (still
picture) appears, but only when the jacket
picture is already recorded on the disc (CD-
EXTRA, etc.). If the disc does not contain a
jacket picture, the [GRAPHICS] picture
appears.
[GRAPHICS]: A preset picture stored in the
system appears.
[BLUE]: The background is blue.
[BLACK): The background is black.
• [PARENTAL CONTROL]
You can set the playback restrictions. For
details, see "Restricting Playback of the Disc"
(page 57).
• [DivX]
(Except for North American models)
You can display the registration code for this
system.
For more information, go to
http://www.divx.com on the Internet.
• [MULTI-DISC RESUME] (DVD VIDEOI
VIDEO CD only)
You can set the [MULTI-DISC RESUME]
function to on/off.
[ON]: The system stores the resume points in
memory for up to 10 discs.
[OFF]: The system does not store the resume
points in memory. Playback restarts at the
resume point only for the current disc in the unit.
• [RESET]
You can return the [SET UP] settings other than
[PARENTAL CONTROL] to the default
settings. For details, see "Returning the
[SETUP] settings to the default" (page 89).
[SPEAKER SETUP]
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
SPEAKER SETUP
CONNECTION: '.
DISTANC~(FRONT):
.
DISTANeE(SI)ElRQlJNO):
.~
. . • .
LEVEJ;:(FRONT}, . .
LEVEl·· .. NO:
T
• [CONNECTION]
If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer settings are fixed, you cannot change
them.
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center speaker is used.