Fellowes PS-79Ci User Manual page 7

BASIC PRODUCT MAINTENANCE AND TROUBLESHOOTING
OILING SHREDDER
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
1
2
*Apply oil across entry Press forward
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
• All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could
ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.
CLEANING AUTO-START INFRARED SENSORS
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present
(Note: two paper detection sensors are located in the center of the paper entry)
TO CLEAN THE SENSORS
2
1
Turn off and unplug Lift CD flap
shredder
PREVENTIVE MAINTENANCE AND MISCELLANEOUS TROUBLESHOOTING
• Run shredder once a day in reverse for 15 seconds to clear cutters
• Empty wastebasket when bin full indicator light is illuminated using bag # 36052
• Shredder will not function if the pull-out bin is not pushed all the way in, or if bin needs to be emptied.
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the
problem, this model will require 20 minutes to cool down.
ACCESSORIES
Maintenance is an important part of protecting your investment. Don't forget oil and shredder bags.
Shredder oil – #35250 PS-79Ci Shredder
plastic bag – #36052
PROBLEM STILL NOT SOLVED?
Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical information, step-by-step
assistance and personal attention.
• www.fellowes.com features an extensive on-line support section with a number of self-service options
• Our customer service professionals are dedicated to resolve any of your issues
Go to Support Section at www.fellowes.com or see back page of manual for useful telephone numbers.
3
4
Shred one sheet
Press and hold forward ( )
2-3 seconds
.
3 4
Locate Auto-start Dip cotton swab in
infared sensor rubbing alcohol
5
Using cotton swab, wipe
away any contamination
from the paper sensors
5