Fisher-Price W9418 Owner's Manual page 10

9
SIDE VIEW
• Fit the steering wheel cap into the center of the
steering wheel.
• Insert two #10 x ¾" screws and tighten.
Cap
10
BOTTOM VIEW
• Turn the vehicle on its side.
• Insert the end of the steering column through the hole
in the steering rod.
• Fit the steering column cap onto the end of the
steering column.
Cap
11
" screw through the large opening
• Insert a #10 x /
3
4
in the steering column cap and into the hole in the
steering column. Tighten the screw.
• Turn the vehicle upright.
W9418pr-0920
ASSEMBLY
Steering
Wheel
Cap
Steering Steering
Column Column
Hood Scopp
Hood
12
• Fit the hood scoop to the top of the hood
• Fit a washer onto four #8 x
• From underneath the hood, insert the four #8 x ¾"
screws with washers through the hood and into the
hood scoop. Tighten the screws.
13
• Insert a hood latch into one of the slots in the front
end of the vehicle.
• Twist the base of the hood latch
the vehicle.
• Repeat this procedure to attach the other hood latch to
the vehicle.
10
¾"
screws.
Hood Latches
FRONT VIEW
/ turn to secure it in
1
4