Tools, Supplies And Required Equipment - Traxxas Slash 5802 Owner's Manual

TOOLS, SUPPLIES AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You'll need to purchase other items, available from your hobby dealer, to operate
and maintain your model.
SUPPLIED TOOLS AND EQUIPMENT
2.5mm "L" wrench 2.0mm "L" wrench
Optional Pinion Optional Spur
Gear see page 20 Gear see page 20
REQUIRED EQUIPMENT
(sold separately)
NiMH battery charger
(peak detecting type recommended)
1.5mm "L" wrench Turnbuckle wrench
Aftermarket Pre-load spacers and shock pistons
servo adapters (on parts tree) see page 19
NiMH 7.2V to 8.4V 6 or 7-cell battery pack
with Traxxas High-Current Connector
U-joint wrench 4-way wrench
Body clips and Battery hold-down pad (to reduce
body washers
battery vibration, if necessary)
8 AA alkaline
batteries
For more information on
batteries, see Use the Right
Batteries on page 11.
Recommended Equipment
These items are not required
for the operation of your
model, but are a good idea to
Antenna nut
include in any R/C toolbox:
wrench
• Safety glasses
• Thin, hobby-quality
cyanoacrylate instant tire
glue (CA glue)
• Hobby knife
• Side cutters and/or needle
nose pliers
• Philips screwdriver
• Soldering iron
A peak-detecting charger
is recommended for best
performance and longest
battery life. For more
information, see Use the
Right Charger on page 10.
SLASH • 5